| LINK BELT TU347 Take Up Unit Bearings | Mounting Hole Countersink Depth:8.6 mm; Mounting Hole Size:9 mm; Oil Holes:3 mm; Dynamic Load Rating:46 kN; Mounting Hole Countersink Diameter:14 mm; Number of Mounting Holes:12; Outer rings PCD:187 mm; Thread Size:M3; D:210 mm; Static Load Rating:80.2 kN; |
| DODGE TU-B-015-TUBRG Take Up Unit Bearings | T min.:-20 °C; S:34.1 mm; N:18mm; Designation of bearing:EX213-40G2T20; Weight:7.01 kg; d1:86 mm; B1:85.7 mm; B:68.2 mm; A2:89.6 mm; L:188 mm; |
| QM INDUSTRIES QVTU16V070SM Take Up Unit Bearings | r1s min:0.6 mm; manufacturer product page:Click here; maximum rpm:13000 rpm; D:52 mm; ring separation:Separable Inner Ring; Min operating temperature, Tmin:-20 °C; Minimum Buy Quantity:N/A; B:18 mm; Nlim (oil):13,000 rpm; ra max:1 mm; |
| LINK BELT TB22423E7E7CSS Take Up Unit Bearings | d:340 mm; D:520 mm; ra max:4 mm; d2:401.8 mm; k:12 mm; b:20 mm; Fatigue limit load, Cu:331 kN; Y2:4.31; Dynamic load, C:3,220 kN; db min:355 mm; |
| LINK BELT TDSU247NC18 Take Up Unit Bearings | J:88.9 mm; Designation of open end cover:SCOU208-24; T max.:100 °C; G:R1/8"; N:M12; Weight:1.75 kg; Designation of housing:PAE208N-; E:15 mm; Z:69.7 mm; H2:99 mm; |
| LINK BELT TH3U2E32E3 Take Up Unit Bearings | L:68 mm; C:14 kN; A2:35.7 mm; A1:13 mm; S:14.3 mm; s1:17 mm; Recommended tightening torque for set screw:3.7 Nm; G:M6x1; H:130 mm; Designation of bearing:UC205-15G2; |
| QM INDUSTRIES QVTU19V303SEN Take Up Unit Bearings | Brand:NTN; Category:Roller Bearings; Max operating temperature, Tmax:120 °C; Y2:1.49; B:30.05 mm; Dynamic load, C:119 kN; Static load, C0:174 kN; Manufacturer Name:NTN; Rating life coefficient, A2:1.4; d:66.68 mm; |
| QM INDUSTRIES QAATU15A300SEM Take Up Unit Bearings | G:R1/8"; N1:22 mm; C:19.5 kN; T max.:100 °C; Dz:70 mm; L1:47 mm; s1:19.05 mm; H2:82 mm; T min.:-20 °C; Designation of bearing:UC206-19G2L3; |
| QM INDUSTRIES QAATU13A208SEM Take Up Unit Bearings | J:76.2 mm; A1:25 mm; C:19.5 kN; L1:22 mm; S:18.2 mm; H:42.9 mm; A:38 mm; B1:48.3 mm; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; |
| DODGE WSTU-IP-104R Take Up Unit Bearings | Bearing Inner Ring Material:Steel; Retainer Type:Std Retainer; Manufacturing Plant Location:Rogersville, TN; Flinger Material:Steel; End Cap Groove:Yes; Bearing Locking Device:Concentric Clamp Col; Ball Material:Steel; Bearing Duty:Medium Duty; Ball Grade:Class 10; Brand:Baldor-Dodge; |
| DODGE TU-A-111-TUBRG Take Up Unit Bearings | SW:4 mm; H:111 mm; N2:45 mm; B:48 mm; H2:75 mm; N1:20 mm; T min.:-40 °C; H1:100 mm; L2:17 mm; d:35 mm; |
| QM INDUSTRIES QMTU20J311SC Take Up Unit Bearings | Recommended tightening torque for set screw:5.5 Nm; A2:40 mm; d:30 mm; A:31 mm; Weight:0.87 kg; C:19.5 kN; T min.:-40 °C; C0:11.2 kN; J:117 mm; Designation of housing:FL206N-; |